Vaetrix ETG Series User Manual
•
Datalogging Application
Turn your ETG into a full blown datalogger with the optional
Data Management Software. The software application can
be downloaded free at
. You can use it for
free on a limited basis. If you would like to use the full
capabilities, contact Vaetrix for details.
The Data Management Software is very easy to use.
Datalogging sessions can be started with just one click.
Simply connect the gauge with the USB cable. The software
will automatically recognize the gauge and appear at the top
of the software with the Model and S/N. If there is more
than one gauge connected to the PC the SN will appear in
the dropdown selection.
To start a new session simply use the slider bar or type in
value to set the logging interval from one second to twenty-
four hours and the press the Start New Session button. A
session can be ended at any time by clicking Stop Session. If
the High or Low Alarm values are enabled in the ETG,
datalogging can be started automatically.
Just check the Start on Alarm condition next to the Logging
Interval.
To retrieve sessions from the gauge press the Upload Data
button. The gauge can store up to 200 unique sessions or
64,000 samples. Click the Delete Device Data button to clear
the entire gauge logging directory. Please remember to save
any sessions to the PC for recall before Deleting Device Data.
2/19/2019
21
