Vaetrix ETG Series User Manual
•
Units
There are twenty three selectable engineering unit available
to choose from. In
Measure Mode
, press the UNITS key and
use the ARROW keys to scroll through the options.
Press the UNITS key to accept the selection and the gauge
will return to
Measure Mode
.
If you would like to focus on a couple different engineering
units or prevent certain users from using an unapproved
choice for calibration, units can be locked or unlocked under
Units in
Program Mode
.
Use the right or left ARROW keys to highlight LOCK, SCROLL,
or UNLOCK. Use the up or down ARROW keys to either
LOCK, SCROLL, or UNLOCK the engineering units, depending
on which function is highlighted.
2/19/2019
20
