background image

  operation

  care of the mixer

  

6

  dimensions

  

3

  

operating specifications

20

50

38

Our products are finished to the highest standard and due care needs to be taken to 
ensure their looks are retained.

We recommend cleaning all products with a soft damp cloth ONLY and advise strongly 
against the use of ALL cleaning products i.e. powders and liquids.

If the above instructions are not followed this will invalidate your guarantee in the 
event of a problem occurring.

Pulling the diverter button 
diverts the flow of water 
from bath to shower.

Moving the contol lever anti-clockwise 
will decrease the water temperature. 
Pull the handle out to increase the flow 
of water.

hot 

cold 

42mm

1/2”

1/2”

Hot Water Supply Temperature:
Maximum: 85° C
Minimum: 10° C higher than the maximum required mixed temperature (advise 65° C)

Operating Pressure:
Maximum: 5 bar
Minimum: 3 bar

27-55mm

185mm

138mm

ZOO 147T Pag.indd   3

11/2/10   11:29:21

Summary of Contents for Zoo evo magma sense life

Page 1: ...e completed Guarantee Registration Form Vado accepts no responsibility for any forms lost in the post and returns by registered means is therefore recommended Under this guarantee which is non transferable Vado will at its option repair or replace free of charge any product or replacement part found to be defective The guarantee does not extend to any consequential loss or damage After repair or r...

Page 2: ...is mixer not to damage its surface Operating pressures on hot and cold line should be kept as balanced as possible in order to assure optimum efficiency Note When pressure is higher than 5 bar a pressure reducer is required to be fitted before the valve Please note if installing in an enclosed environment access should be left for servicing and maintenance No costs relating to inadequate access ca...

Page 3: ...above instructions are not followed this will invalidate your guarantee in the event of a problem occurring Pulling the diverter button diverts the flow of water from bath to shower Moving the contol lever anti clockwise will decrease the water temperature Pull the handle out to increase the flow of water hot cold 42mm 1 2 1 2 Hot Water Supply Temperature Maximum 85 C Minimum 10 C higher than the ...

Page 4: ...ngaging with the nylon shaft if necessary gently tap the handle onto the shaft using a rubber mallet or similar in order to avoid damaging the handle finish and taking care to support the valve body Tighten the allen bolt screw on the handle Finally screw on the diverter button The valve has been factory set under balance pressures and hot water supply at 65 C When your specific operating conditio...

Reviews: