background image

zoo  evo  magma  sense  life

 

NOTE: For illustrative purposes only the zoo shower mixer is shown. 

Please follow the same procedure to install the other products.

single lever thermostatic bath shower mixer with diverter

20

50

38

Vado

Wedmore Road, Cheddar, Somerset, England BS27 3EB

tel 01934 744466.      fax 01934 744345

[email protected]

www.vado-uk.com

  guarantee

  customer/technical services

For any technical or installation queries please contact Vado on 01934 745163.

GUARANTEE REGISTRATION

NAME
ADDRESS

RETAILER
ADDRESS

PURCHASE DATE
PRODUCT DESCRIPTION
WHO INSTALLED THE PRODUCT?
FOR VADO USE

POSTCODE

POSTCODE
ARTICLE NUMBER

(SEE BOX)

RETAILER

PLUMBER

BUILDER

SELF

This product is guaranteed against manufacturing defects from the date of purchase until the expiry of the relevant 
guarantee period shown below.

The guarantee is only valid if:-

1. The product has been installed, used and maintained in accordance with Vado’s instructions and subjected to 
normal use only.
2. The defect is not due to use of an unsuitable or inadequate water or power supply.
3. The defect is not due to accident, misuse, neglect or repair other than by Vado or Vado authorised agents or 
damage caused by foreign objects or substances.
4. We have received from you the completed Guarantee Registration Form. Vado accepts no responsibility for any 
forms lost in the post and returns by registered means is therefore recommended.
Under this guarantee (which is non-transferable) Vado will, at its option, repair or replace free of charge any product 
(or replacement part) found to be defective. The guarantee does not extend to any consequential loss or damage. 
After repair or replacement the relevant guarantee period will be calculated from the original date of purchase.

The relevant guarantee periods are:-

1. Twelve years on chrome finish products.
2. Three years on all other products with the exception of Stuart Turner Pumps which carry a 2 year Guarantee on 
Monsoon Range and 1 Year Guarantee on Showermate Range.
All claims under the guarantee must be submitted in writing to the person who supplied the product to you and 
must be received no later than the last day of the relevant guarantee period. All claims must be accompanied by 
proof of purchase (sales receipt or delivery note).
Vado operates a policy of continuous product development and therefore reserves the right to change the product, 
packaging and documentation specifications without notice.
This guarantee is in addition to and does not affect your statutory rights as a consumer.

installation & maintenance instructions

please leave these instructions with the customer

please note handle fitting instructions

ZOO 147T Pag.indd   1

11/2/10   11:29:21

Summary of Contents for Zoo evo magma sense life

Page 1: ...e completed Guarantee Registration Form Vado accepts no responsibility for any forms lost in the post and returns by registered means is therefore recommended Under this guarantee which is non transferable Vado will at its option repair or replace free of charge any product or replacement part found to be defective The guarantee does not extend to any consequential loss or damage After repair or r...

Page 2: ...is mixer not to damage its surface Operating pressures on hot and cold line should be kept as balanced as possible in order to assure optimum efficiency Note When pressure is higher than 5 bar a pressure reducer is required to be fitted before the valve Please note if installing in an enclosed environment access should be left for servicing and maintenance No costs relating to inadequate access ca...

Page 3: ...above instructions are not followed this will invalidate your guarantee in the event of a problem occurring Pulling the diverter button diverts the flow of water from bath to shower Moving the contol lever anti clockwise will decrease the water temperature Pull the handle out to increase the flow of water hot cold 42mm 1 2 1 2 Hot Water Supply Temperature Maximum 85 C Minimum 10 C higher than the ...

Page 4: ...ngaging with the nylon shaft if necessary gently tap the handle onto the shaft using a rubber mallet or similar in order to avoid damaging the handle finish and taking care to support the valve body Tighten the allen bolt screw on the handle Finally screw on the diverter button The valve has been factory set under balance pressures and hot water supply at 65 C When your specific operating conditio...

Reviews: