6
dimensions
3
Operating Specifications
Operating Pressure:
Minimum operating pressure 3 bar
Maximum operating pressure 5 bar
installation - spout (optional) and shower
Rubber
washer
Nut
Connecting
tube
Shower
hose
Cover
plate
Washer
Hand set
Position the spout in place , and from the
underside slide on the rubber washer and
nut. Tighten the nut to clamp on the spout.
CAUTION:
Do not over tighten the nut.
Connect the spout to the diverter using
the large flexible pipe.
If you are installing the Synergie 132ns
(without spout) please ignore this
section.
Rubber
washer
Nut
Position the Cover plate/connecting
tube in place and from the underside
slide on the rubber washer and nut.
Tighten the nut to clamp on the cover
plate.
CAUTION:
Do not over tighten the nut.
Place the rubber washer into the cone
end of the hose and screw to the
handset, thread the other end of the
shower hose down through the cover
plate and screw onto the bottom of the
diverter.
200mm
81mm
140mm
99mm
75mm
42
G3/4
82mm
6mm
6mm
37mm
34.8
220mm
max 45mm
max 45mm
max 45mm
max 45mm
G1/2
42
56mm
56mm
56mm
Syn 132.indd 3
10/2/10 11:05:13
