11
10
Installation
Slide the collar into the hole. Line up the holes and secure in position using the screws
from the previous step.
Collar
Tiling guide
Installation
Tile around the tiling guide as tight as possible. Keep the final finished wall surface
between the min and max marks.
Outlet
Inlet from
ZON-128
Tiling guide
Outlet arrow on
valve
Screws
Screws
Remove the 2 screws using the suitable hex key provided with the ZON-128 and pullout
the tiling guide.
After removing the blanking plug and adding the outlet adaptor to the ZON-128 connect
the water supply to the right inlet of the valve. Connect the outlet (arrow on valve) to the
desired channel e.g. shower head and handset.