background image

  

4

  

5

  Operation

Moving the mixer lever upwards/downwards will increase/decrease the flow of water.

Moving the mixer lever from right to left will increase the water temperature. 

on = up    off = down 

hot = left    

cold = right 

  Installers/users notes

Summary of Contents for Geo

Page 1: ...antee which is non transferable Vado will at its option repair or replace free of charge any product or replacement part found to be defective The guarantee does not extend to any consequential loss or damage After repair or replacement the relevant guarantee period will be calculated from the original date of purchase The relevant guarantee periods are 1 Twelve years on chrome finish products 2 S...

Page 2: ...wders and liquids If the above instructions are not followed this will invalidate your guarantee in the event of a problem occurring These fittings are mixing devices and therefore water supplies must be reasonably balanced Where connections are made to the mains cold water supply WRC approved single check valves must be fitted to both hot and cold inlets This is a stated requirement of Water Supp...

Page 3: ...aded rod into the back hole in the base of the mixer body Position the mixer on the basin mixer body hand tighten only but do not over tighten the left the washer onto the threaded rod the rubber side should be on top Screw on the nut and tighten to clamp the mixer to the basin CAUTION Do not over tighten as this may damage the parts and or the basin Connect the water supply to the inlet pipes The...

Page 4: ...oving the mixer lever upwards downwards will increase decrease the flow of water Moving the mixer lever from right to left will increase the water temperature on up off down hot left cold right Installers users notes ...

Reviews: