2
3
Please read these instructions carefully before starting installation and keep for
future reference.
Remove all packaging and check the product for missing parts or damage before
starting installation.
Any alterations made to this product and fittings may infringe water regulations and
will invalidate the guarantee.
The installation must comply with all Local/National Water Supply Authority
Regulations/Byelaws and Building and Plumbing Regulations.
To be installed in accordance with BS EN806.
We strongly recommend that you use a qualified and registered plumber.
General installation
Operating Specifications
Important - please read
Operating Pressure
Minimum operating pressure for shower
0.2 bar
Minimum operating pressure for bath
1 bar
Maximum operating pressure
5 bar
This fitting is a mixing device and therefore operating pressures (hot and cold supply)
should be kept as balanced as possible in order to assure optimum efficiency.
When installed, the fitting must comply with the requirements of the Water Supply
(Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
For further information, contact the Water Regulations department of your local water
supplier (see the WRAS website www.wras.co.uk for details) or the Water Regulations
Advisory Scheme by email (info
@
wras.co.uk) or telephone: 01495848454.
Before making any inlet pipe connections, all supply pipes MUST be thoroughly flushed to
remove debris. Failure to do so could result in damage or low flow from the mixer unit.
The fitting of strainers is recommended as close as practicable to the water supply
inlets of the thermostatic mixing valve.
If the concealed valve is connected to pipework that is fixed by soldering, it is essential
the concealed valve is protected to prevent the check valves, thermostatic cartridge and
headworks being exposed to elevated temperatures which can cause internal damage.
Please note:
if installing in an enclosed environment, access should be left for servicing
and maintenance. No costs relating to inadequate access can be accepted.
Contents of Packaging
Valve body
(with mortar guard)
Installation guide &
user guide
Adaptors ¾" to ½"
(x 5)
Drain valve
ADAPTOR BOX
DRAIN VALVE BOX
3 Outlet 2 Handle Concealed Thermostatic
Valve
ELE-148D/3/SQ-CP
Keep for future reference
Installation Guide
ELEMENTS
WHERE
INSPIRATION
FLOWS
ELEMENTS
3 Outlet 2 Hand
le Concealed Th
ermostatic Valv
e
15
ye
ar g
uarante
e
User Guide
Keep for future
reference
