VADO AXCES AX-SIR-123T-RRK/B-CP, Installation & User Manual, Page: 5 / 10

8 9
Installation
Carefully push the riser arm down into
the riser rail, being careful not to damage
the seals. Make sure that the riser arm
is pointing forwards and the bracket
backwards.
When in the correct position, tighten the
handle to secure in position.
Level
Ensure there is a washer inside the riser
rail nut. Place the riser onto the valve and
hand tighten the nut.
Slide the wall bracket onto the riser rail
bracket.
Riser rail
Riser rail
Riser rail nut
Washer
Handle
Riser rail
Wall bracket
Bracket
Bracket
Wall bracket
Riser arm
With the bracket in the required position
against the wall.
Make sure that the riser is vertical (side
to side) and mark a line around the wall
bracket with a pencil. Remove the riser
from the wall and the valve.
Installation
Wall bracket
Screw
Warning! Please check for any
hidden cables and pipes before drilling
holes in the wall.
Screw the two grub screws into the
bracket.
Find the centre of the marked bracket.
Suitably fix the wall bracket to the wall
using appropriate fixings, make sure that
the grub screws are at the top.
The supplied fixings are for solid walls.
Wall plug
(if required)
At the top push the riser bracket into the
wall bracket.
Make sure the riser is vertical (forwards
and backwards) with a level. Tighten the
riser to the wall bracket with the two grub
screws at the top using the hex key.
Finally tighten the nut to secure the riser
to the valve.
Hex key
Carefully screw the riser onto the valve
at the bottom but do not tighten.
Riser rail
Riser rail nut
Wall bracket
x 2