Instructions and settings
20
01.03.2014 2
1.9.5
Setting the spill prevention plates
Figure 1.15
The spill prevention plates which are mounted on StripDrill must work approx. 1 cm below ground level.
Note that the vertical setting of the spill prevention plates should be adjusted in cases of considerable
changes to the working depth.
To adjust the height of a plate, remove the screw (A) and move the holder up or down in the hole series
(B) to the desired position.
A
B
Summary of Contents for Spirit StripDrill ST 600C Series
Page 2: ...V derstad Verken AB V derstad Sweden 2014...
Page 4: ...4 01 03 2014 2...
Page 37: ......
