7
17/05/2016
RD 300-400S/C
It is important that you also check that the following harrow tines run between the seed rows, one tine
should run straight in front of the wheel, and one centrally between the wheels.
If you need to adjust the entire tine row, do so by loosening the bolts holding the shaft in the drawbar.
Front tools
All front tools, other than the CrossBoard system, are depth-adjusted using clips located on the piston rod.
Operation of the front tool is controlled by the lift circuit (Yellow circuit).
If the machine is equipped with CrossBoard, this is controlled by the white hydraulic circuit.
Fertiliser coulters
Fertiliser coulters are operated using a crank on the right
and left side respectively.
Normally, the fertiliser depth is deeper than the seed depth.
Settings
