Check that the wing sections’ locking hooks are
engaged before carrying out work underneath the
folded up section.
Figure 9.2
Adjust and secure the support stand.
9.3
Regular maintenance
Figure 9.3
•
Before driving off, make sure that all nuts and bolts
have been tightened. Regularly check throughout the
season that screws and bolts are tightly fitted and
inspect for wear in the joints and hydraulic cylinder
mountings
•
Check the tyre pressure continuously
•
The hydraulic system will not normally require any
maintenance, but check that hoses and couplings have
not been damaged
•
Lubricate the machine according to the intervals
specified in the lubrication schedule, and always
before and after winter storage and after cleaning with
a high-pressure washer, see
•
Machine parts with a bright finish, such as the thread
of the piston rods and wearing parts, should be treated
with corrosion protection in the case of prolonged
storage.
•
The use of a degreasing agent will dissolve the waxy
protective coating that is applied during manufacture
to hydraulic couplings, galvanised bolts and other
exposed places. The protective waxy coating can be
restored by using
Tectyl Dinitrol 1000
or
Mercasol
•
Inspect the machine’s towing eye, see
Inspecting the machine’s towing eye“
•
Check that hoses and couplings have not been
damaged
•
Further tighten screws and wheel nuts.
34
903815-en-gb; 23.09.2021
