Vaderstad Carrier X Series, Instructions Manual

Page: 42 / 48

Service and maintenance
42 01.05.2015 1
4.16 Lifting using a crane
If the implement is to be lifted using a crane, the choice of lifting points must be a considered one.
If the implement is in working mode, lifting must be done from the centre section. If the imple-
ment is in transport mode, it must be lifted from the wing sections.
NOTE! Use lifting devices that are designed for the weight of the implement, see “5.2 Technical
data” on page 46 .
NOTE! Put safety first: never stand under a suspended load.
4.16.1 Lifting with implement in work mode
Figure 4.10
1 Set the implement to work mode, see “2.5 Switching to working mode” on page 22 .
2 Connect the lifting devices to the four lifting points on the centre section of the implement in
accordance with
“Figure 4.10”.
The lifting points are indicated by the decal .
Min 3m