WallVIEW PRO HE100
WallVIEW PRO HE100 Installation and User Guide 341-790 Rev. B
Page 5 of 12
Step 8 (continued):
Attach the Cat. 5 cables for Power, Video and Control to the Quick-Connect PRO interface. Connect the HD
video output BNC connectors. Connect the PowerRite 36 VDC power supply to the Quick-Connect PRO
power input. Please check all Cat. 5 cables for continuity in advance of final connection.
Note: Plugging the POWER Cat. 5 Cable into the wrong RJ-45 may cause damage to the camera system and void the warranty.
Step 9:
Connect the Vaddio 36 VDC power supply to an AC outlet. Power will travel down the Power Cat. 5 cable to
the cable shoe, powering the camera. The camera will “Home” to a centered position ready for control
information from the IR remote control or RS-232/422 camera controller of the integrators’ choice. NOTE:
To insure proper continuity of control and operation of the cameras, the RS-232 controller (control system or
joystick) should be powered on after the camera.
Step 10:
Follow the instruction manual supplied with the AW-HE100 to set up the camera for the lighting conditions
that the camera is installed in (fluorescent, halogen, etc.), as well as the selected output resolution. The
Quick-Connect PRO is configured to work with the camera delivering component HD 1080i or 720p video.
Adjust the Y-Gain on the back of the Quick-Connect PRO (see Figure 6) for video quality.
Optional Installation for Simultaneous Standard Definition Video:
Standard definition video can be delivered over one additional Cat. 5 cable using two Quick-Connect boxes
(Part # 998-1105-001). Connect a BNC to RCA cable between the Video Out of the camera, and the RCA
input of the Quick-Connect Box. Run a Cat. 5 cable – up to 300 feet – to another Quick-Connect Box.
Connect another video cable between the other Quick-Connect Box and the head end equipment, such as
the video monitor (shown below). No power supplies are required in the configuration below.
Single Cat. 5 Cable
up to 300 feet
BNC to RCA
Composite Video
Cable
BNC to RCA
Composite
Video Cable
Figure 7:
SD video through optional
Quick-Connect boxes and
additional Cat. 5 cable.
PreVIEW Triple 5.6 Standard Definition
Rack Mount LCD Monitors
WallVIEW PRO
HE100 with
Camera, Wall
Mount and EZIM