IN-Ceiling Half-Recessed Enclosure for HD Series and RoboSHOT Cameras
IN-Ceiling Half-Recessed Enclosure Manual
●
Document Number 342-0177 Rev. E
Page 2 of 8
Overview:
Vaddio’s IN-Ceiling, Half-Recessed Enclosure is an attractive,
easy to install, partially recessed and inverted, PTZ camera
mounting system. IN-Ceiling Half-Recessed Enclosure is
compatible with the all WallVIEW systems (ClearVIEW and
PowerVIEW (HD-30/22/20
SE
/20/19/18) and the RoboSHOT
series camera systems.
The enclosure features a sealed, recessed, metal ceiling camera
enclosure with one-piece tile support brace, white trim ring and
mounting hardware kit.
The white trim ring has an active IR receiver and there is an IR
emitter board, powered by the 24 VDC Quick-Connect interfaces
(Quick-Connect USB, Quick-Connect USB Mini, Quick-Connect
SR and Quick-Connect DVI/HDMI-SR) on the inside of the
enclosure to ensure full compatibility with the Vaddio IR Remote
Commander.
The IN-Ceiling enclosure is compatible with the following camera systems using RS-232 control only; ClearVIEW
and PowerVIEW Series cameras (locally powered), all WallVIEW CCU Systems (powered by the CCU). These
systems do not use the IR Receiver/Emitter circuit inside the enclosure.
The IN-Ceiling Half-Recessed Enclosure is an appealing half-recessed mounting solution. So relax, and try an IN-
Ceiling, Half-Recessed camera enclosure today. And always remember, camera systems are sold separately.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com
free of charge.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-through” type RJ-45 connectors. These pass-through type
connectors do not work well for professional installations and can be the cause of
intermittent connections which can result in the RS-232 control line failing and locking
up, and/or compromising the HSDS™ signals. For best results please use standard
RJ-45 connectors and test all cables for proper pin-outs prior to use and connection to
Vaddio product.
In-Ceiling, Half-Recessed Enclosure shown with
the ClearVIEW HD-20
SE
AW Arctic White PTZ
