Installation
This section covers
n
Siting the camera
n
Installing the mount
n
Connecting the camera
n
Installing the camera
Before You Install the Camera
n
Choose a camera mounting location that will optimize camera performance. Consider camera viewing
angles, lighting conditions, line-of-sight obstructions, and in-wall obstructions where the camera is to be
mounted.
n
If the IR Remote Commander will be used, ensure that nothing blocks the IR lens in the camera's base.
n
Ensure that the camera body can move freely and point away from the ceiling and lights.
n
Follow the installation instructions included with the camera mount.
Don’t Void Your Warranty!
Caution
This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate
protective enclosure. Do not allow it to come into contact with any liquid.
Use only the power supply included with this product. Using a different one will void the warranty, and
could create unsafe operating conditions or damage the product.
Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these
things happen, return it to Vaddio for safety and functional testing.
DomeVIEW enclosures are available to allow outdoor installation of RoboSHOT cameras. Learn more at
www.vaddio.com/products
.
Cabling Notes
Use Cat-5e or better cable and standard RJ-45 connectors (568B termination). We recommend using high-
quality connectors and a high-quality crimping tool.
Caution
Check Cat-5 cables for continuity before using them. Using the wrong pin-out may damage the camera
system and void the warranty.
Note
Do not use pass-through RJ-45 connectors. These can cause intermittent connections
and degraded signal quality, resulting in problems that may be hard to diagnose. Use
standard RJ-45 connectors.
Pro Tip
To prevent tragic mishaps, label both ends of every cable.
7
Installation Guide for RoboSHOT 20 UHD High Performance, Ultra High Definition PTZ Camera
