Powering Up the Camera
Connect camera power.
The camera will wake up and initialize. This will take a few seconds. When the camera is initialized and
ready, its front indicator is blue. At this point, it is ready to accept control information.
When powering up, the RoboSHOT 20 UHD camera executes a different sequence of movements than
other Vaddio PTZ cameras.
Note
Wait until the camera finishes initializing before trying to control it using the IR remote or other command
input.
Operation, Storage, and Care
For smears or smudges on the product, wipe with a clean, soft cloth. Use a lens cleaner on the lens. Do not
use any abrasive chemicals.
Keep this device away from food and liquids.
Do not operate or store the device under any of the following conditions:
n
Temperatures above 40°C (104°F) or below 0°C (32°F)
n
High humidity, condensing or wet environments
n
Inclement weather
n
Severe vibration
n
Between converging tectonic plates
n
Dry environments with an excess of static discharge
Do not attempt to take this product apart. There are no user-serviceable components inside.
Next Steps
The camera is now ready to configure and use. This information is available in the
Configuration and
Administration Guide for RoboSHOT 20 UHD Ultra High Definition PTZ Cameras
. It is also
included in the
Integrator's Complete Guide to RoboSHOT 20 UHD Ultra High Definition PTZ
Cameras
.
10
Installation Guide for RoboSHOT 20 UHD High Performance, Ultra High Definition PTZ Camera
