The Quick-Connect DVI/HDMI-SR Interface
This interface provides connectivity to older equipment.
Back panel features:
n
Power
– Illuminates when power is connected.
n
24 VDC 2.0 A power connector
– Connect only the power supply shipped with the Quick-Connect.
n
Color Space
– Toggles between HDMI YCbCr and sRGB (RGBHV) color space to accommodate
either HDMI or DVI-D monitors.
n
RS-232 Control Input
– Camera control input from a Vaddio joystick controller or other controller.
n
RS-232 Control Out to Camera
– Control signals to the camera.
n
Daisy Chain
– Daisy Chain Control Emulation (DCCE) output to the next Quick-Connect DVI/HDMI-
SR interface.
n
IR Output
– Forwards IR signals from the camera to third party equipment such as videoconferencing
codecs. Use the MOD signal if the IR is from a remote or other IR emitter; use the NON-MOD signal for
wired connections.
n
DVI-D/HDMI
– HDMI 1.3 and DVI v 1.0 compliant.With a DVI to HDMI adapter, extends HDMI to an
output device up to 100 ft. (30 m) away.
n
YPbPr
– Analog component video output from the camera. Resolutions up to 1080p/60.
n
EZ-Power Video
– Power to the camera and video from the camera. Maximum cable distance 100 ft.
(30 m).
21
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
