To attach the camera mounting plate to the column:
1. Slide the posts on the camera mounting plate into the keyhole slots on the base of the column.
Warning: Support the camera until the posts engage the keyhole slots and
the locking plate is fully engaged and locked into place. Releasing the
camera before it is fully locked could allow it to fall, possibly resulting in
injury as well as equipment damage.
2. Move the locking lever on the base of the column to the locked position.
3. Optional: Use the keylock to secure the locking lever. The key is provided with the mounting system.
Connecting the Camera
1. If you are using a camera interface mounted in the tile bridge, connect its cables according to its
documentation.
2. Route the camera's cable(s) through the cable channel in the column. If you are not using a camera
interface mounted in the tile bridge, you may find it convenient to slide the cable cover out until the
cables are in place.
3. Connect the cable(s) to the camera.
4. Guide the camera cable(s) into the notch at the back of the camera mounting plate and gently draw any
excess length back up the column.
5. Slide the cable cover back into place if necessary.
16
Installation Guide for the QuickCAT Universal Ceiling Mount for PTZ Cameras
