background image

Quick-Connect CCU Kit for BRC-H900 Camera 

 

© 2012 Vaddio - All Rights Reserved.  Document Number 342-0507 Rev A                                                                                    Page 5 of 16

 

 

Information: 

For RS-232 control information, please see the full-length Technical Manual for the Sony BRC-H900.  This 
manual can be found either on the Sony or the Vaddio website.   

Unpacking: 

998-

6897-

000:  Quick-Connect CCU Kit (NO CAMERA) for the BRC-H900 Camera - North America 

Carefully remove the device(s) and all parts from the packaging.  Please do 
not toss the packaging yet, just set it aside where it won’t be in the way.  
Unpack and identify the following parts: 

 

One (1) Quick-Connect CCU (P/N:  998-1105-036) for the BRC-H900 

 

One(1) 2-pin Molex 5.0mm Euro style connector for the Tally Input

 

 

 

One (1) 36 VDC Switching power supply with power cord for North America 

 

One (1) EZIM CCU (998-6700-002) 

 

Two (2) 6-32 x .188” Pan Head for attaching EZIM to the Wall Mount 

 

One (1) HD Break-out Cable for EZIM CCU to Camera 

 

One (1) DE-9F to RJ-45F EZCamera Control Adapter (998-1001-232) 

 

One (1) Heavy Duty, Gusseted Wall Mount 535-2000-225  

 

Four (4) 800-616, #8 x 1.25” Sheet Metal Screws 

 

Four (4) 800-617, Wall Anchors (EZ Anchors) 

 

Two (2)  85033, ¼” x 20 x 0.5” Pan Head Screws 

 

Manual for Quick-Connect CCU 

998-

6897-

001:  Quick-Connect CCU Kit (NO CAMERA) for the BRC-H900 Camera - International 

Carefully remove the device(s) and all parts from the packaging.  Please do 
not toss the packaging yet, just set it aside where it won’t be in the way.  
Unpack and identify the following parts: 

 

One (1) Quick-Connect CCU (P/N:  998-1105-036) for the BRC-H900 

 

One(1) 2-pin Molex 5.0mm Euro style connector for the Tally Input

 

 

 

One (1) 36 VDC Switching power supply  

 

One (1) Euro Power Cord 

 

One (1) UK Power Cord 

 

One (1) EZIM CCU (998-6700-002) 

 

Two (2) 6-32 x .188” Pan Head for attaching EZIM to the Wall Mount 

 

One (1) HD Break-out Cable for EZIM CCU to Camera 

 

One (1) DE-9F to RJ-45F EZCamera Control Adapter (998-1001-232) 

 

One (1) Heavy Duty, Gusseted Wall Mount 535-2000-225  

 

Four (4) 800-616, #8 x 1.25” Sheet Metal Screws 

 

Four (4) 800-617, Wall Anchors (EZ Anchors) 

 

Two (2)  85033, ¼” x 20 x 0.5” Pan Head Screws 

 

Manual for Quick-Connect CCU 

 

999-6897-000:  WallVIEW CCU H900 Systems - North America 

Unpack and identify the following parts: 

  One (1) 998-6897-000:  Complete Quick-Connect CCU Kit Above for the BRC-H900 

Camera - North America 

  One Sony BRC-H900 Camera Complete with Manual and all accessories Sony 

includes 

999-6897-001:  WallVIEW CCU H900 Systems - International 

Unpack and identify the following parts: 

  One (1) 998-6897-001:  Complete Quick-Connect CCU Kit Above for the BRC-H900 

Camera - International 

  One Sony BRC-H900 Camera Complete with Manual and all accessories Sony 

includes 

 

Summary of Contents for Quick-Connect CCU H900

















Reviews: