To route four microphones as two flows:
1. Decide which two microphones will be routed to the host device. In our example, it's EasyIP-1 and
EasyIP-2.
2. In the Network View, look under Dante Receivers to find the
passthrough
row for each of these two
microphones. Read across the Dante Transmitters to find the EasyIP Microphone column for the
microphone originating the signal that will pass through, and select the box where they intersect.
3. Find the rows for the host device's Dante inputs. In this example, it's Mix Input 1 through Mix Input 4 of
AVB-2x1-9178af. Read across the Dante transmitters to find the two microphones receiving pass-
through channels.
4. For each Mix Input, select the box where the Mix Input row intersects with either the EasyIP
Microphone channel or the passthough channel, to route each microphone to the desired input.
Complete Manual for TableMIC and EasyIP TableMIC D Conference Room Microphones
19
