IR Remote Details
The Vaddio remote provides the following functions:
Power
– Switch the selected camera on or off.
Power indicator
– Lights momentarily when you press a button.
Back Light
– Use or turn off Back Light Compensation.
Data Screen
– Display the camera’s IP address and MAC address. Press this button
again to dismiss the display.
Camera Select
– In multi-camera installations, selects the camera to be controlled.
Home button
– Returns the camera to its home zoom level.
Laser On
– Toggles the laser pointer on and off.
Laser MOM
– Turns on the laser pointer momentarily, and forbids it to go out with
its friends if it doesn't turn off again after 5 seconds.
Camera assembly numbers 998-9968-001 and 998-9968-100:
Note
This product contains a Class 1, 650 nm red laser pointer.
Cet appareil contient un pointeur laser de la Classe 1, à lumière rouge de 650
nm.
Caution | Avertissement
Laser light – Avoid direct eye exposure. Do not look at the laser aperture
during camera operation.
Lumière de laser – Ne regardez pas directement dans le faisceau laser. Ne regardez pas directement
dans l'ouverture laser lorsque la caméra est en marche.
Auto Focus
– Switch the camera to Auto-Focus mode.
Zoom Speed
– Select Slow or Fast movements for telephoto and wide-angle shots.
n
T
(slow and fast) – Telephoto
n
W
(slow and fast) – Wide-angle
Manual Focus
– Switch the camera to Manual Focus mode.
Near (-)
adjustment – Moves the focus nearer when in manual focus mode.
Far (+)
adjustment – Moves the focus farther when in manual focus mode.
Preset
– Save the camera’s current zoom level as one of the numbered presets.
Reset
– Clear a saved preset.
Position Presets 1 through 6
– Move the camera to a predefined zoom level, or specify the preset to save or
clear.
Storing a Preset Using the Remote
Position the camera. Then hold down the Preset button and press one of the numbered preset buttons.
Clearing a Preset Using the Remote
Press and hold the Reset button while pressing the preset number you want to clear.
