Installation
This section covers siting the camera, installing the mount, and installing the camera.
Before You Install the Camera
All ConferenceSHOT cameras include a wall mount. Other mounting options are available as well. Contact
us if you don’t have the camera mount you need.
n
Choose a camera mounting location that will optimize camera performance. Consider camera viewing
angles, lighting conditions, line-of-sight obstructions, and in-wall obstructions where the camera is to be
mounted.
n
Ensure that the camera can be pointed appropriately from the desired location. The camera will not
perform well if it is pointed toward a light source such as a light fixture or window.
n
Follow the installation instructions included with the camera mount.
Don’t Void Your Warranty!
Caution
This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate
protective enclosure. Do not allow it to come into contact with any liquid.
Use only the power supply included with this product. Using a different one will void the warranty, and
could create unsafe operating conditions or damage the product.
Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these
things happen, return it to Vaddio for safety and functional testing.
Learn more at
Cabling Notes
Note
Use standard RJ-45 connectors and a good crimping tool. Do not use pass-through
RJ-45 connectors. Poorly crimped connectors can damage the connectors on the
product, cause intermittent connections, and degrade signal quality. Test cable pin-
outs and continuity before connecting them.
Intact
– Contact fingers will make reliable
contact with the cable connector
Damaged
– Some contact fingers are bent
and will NOT make reliable contact with the
cable connector
Pro Tip
Label all cables at both ends.
5
Integrator's Complete Guide to the ConferenceSHOT FX USB 3.0 Fixed Camera
