Operating the Camera from the Web Interface
The web interface is available on the Vaddio Device Controller touch panel (if your installation uses one) or from
a computer’s web browser.
The operator's Camera page provides most of the same controls as the IR Remote Commander, along with some
that are not available from the remote:
n
Pan, tilt, zoom, or return to home position
n
Stop or resume transmitting live camera video (video mute)
n
Mute or unmute the microphone(s)
n
Change the speaker volume
n
Put the camera in standby or bring it back to the ready state
n
Move to camera presets, if any have been stored
If your installation does not include a Vaddio Device Controller or other control surface, contact the system
administrator to find out how to access the web interface.
Stopping or Resuming Video
Use the video mute button to temporarily stop video from the camera without placing it in standby. Remember
that the mute button does not mute the room's microphones. In video mute mode, the camera transmits blue
or black video, with a message that the video is muted.
3
