Selecting Cameras
O
PERATOR
'
S
H
OME PAGE
The web interface shows the active video sources in red. Depending on the current configuration, you may
be able to set Stream and Program outputs separately. If the device is configured to route the stream to the
Program output, the web interface displays only one row of buttons for the video output.
Note
The IP and USB streams use the same video source.
Select the desired source for the available output(s).
Selecting a PIP Source and Layout
A
LL OPERATOR PAGES
The PIP is only available in the stream.
In the web interface, the button for the active PIP source is highlighted. If all four PIP source buttons are
highlighted, the stream is using the quad screen layout; if no buttons are highlighted, there is no PIP.
1. Select Layout to check or change the PIP layout.
2. Select the desired PIP source, if not using the Quad Screen layout.
7
Operator's Guide to the AV Bridge MATRIX PRO AV Encoder
