Using Dante Devices with the EasyIP Mixer
The EasyIP Mixer is compatible with Dante audio products. These products connect to the EasyIP Mixer
over the network.
To pair Dante devices to the EasyIP Mixer or other Dante-compatible Vaddio products, you will need to
download and install the free Dante Controller application from Audinate Pty. Ltd.:
www.audinate.com/products/software/dante-controller
Things to know about Dante technology and the Dante Controller application:
n
Dante technology does not work over Wi-Fi.
n
Dante Controller does not work across subnets.
Your computer must be on the same subnet as the
Dante devices you need to work with.
n
Default device names and IP addresses shown in Dante Controller do not match the
corresponding information shown in Vaddio devices' web interfaces.
The Dante Controller
application uses information from the devices' Dante chips, which receive their own IP addresses.
n
Dante Controller allows you to rename devices
, so you can make their identifying labels match
what's displayed in the Vaddio web interface. We recommend doing this.
Audinate provides the latest information, training, and documentation for Dante technology on their
website. Information in this manual about Dante technology and Audinate products may be out of date.
40
Complete Manual for EasyIP Systems
