Locating and Pairing to Cameras on the Network – EasyIP Mixer
V
IDEO
I
NPUTS PAGE
Cameras are paired to the EasyIP Mixer if the EasyIP input buttons on the Video Switching page are
active. The cameras' information appears in the EasyIP Input tabs of the Video Inputs page. Cameras may
be paired to two host devices.
Status indications tell you whether each camera is currently available.
n
Disconnected
– The camera is currently unavailable, or the input is not paired to a camera.
n
Unauthenticated
– A camera is paired, and is waiting for you to log in as admin from this device.
n
Connected
– A camera is paired, ready to send video and accept commands.
Locating and pairing to cameras works similarly on the EasyIP Decoder, but the web interface page
structure is somewhat different.
37
Complete Manual for EasyIP Systems
