What's in this Guide
This guide covers:
n
Unpacking the system
n
Tips for a successful installation
n
Instructions for installing the camera mount
n
Information on connecting the system components
n
Information on mounting the camera
n
System power-on
Complete product information for the EasyIP product family is available in the
Complete Manual for
EasyIP Systems
.
Note
If you are responsible for configuring the equipment after installing it, you will need the Complete
Manual.
It includes the information from this guide, plus information on system administration, operation,
and troubleshooting.
The EasyIP Ecosystem
Vaddio
®
EasyIP products are designed to be used together, and have limited or no compatibility with other
types of products.
n
EasyIP cameras deliver video in Vaddio's proprietary EasyIP format.
n
An EasyIP host device (EasyIP Decoder or EasyIP Mixer) is required to convert the cameras' output
signal to an IP and/or USB stream.
n
Only paired EasyIP cameras can be controlled by the EasyIP host device.
n
EasyIP host devices automatically detect EasyIP cameras on its own subnet.
n
Cameras are not required to be on the same subnet as the device that manages them.
n
EasyIP products require PoE+ power. Typically the EasyIP system is powered by a PoE+ switch.
EasyIP Decoder
The decoder is the central component of a basic EasyIP installation. Its functions include
n
Video – pair with up to four cameras at a time, control the active camera via web interface, and decode
the camera's AV-over-IP signal.
n
Audio – connect two EasyMic microphones (CeilingMIC or TableMIC) and a speaker.
n
USB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing
applications.
EasyIP Mixer
The mixer is the central component of a full-featured EasyIP pro AV room solution. Its functions include
n
Video – pair with up to four cameras at a time, control the active camera via web interface, and decode
the camera's AV-over-IP signal.
n
Audio – two balanced audio inputs and outputs; pair with Dante
®
audio products on your network –
including up to four EasyIP microphones. Built-in audio mixer.
n
USB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing
applications.
EasyIP Cameras
EasyIP cameras may be installed anywhere on the network. They require only a PoE+ power connection.
An EasyIP Decoder or EasyIP Mixer is needed as a host device to decode the AV-over-IP signal.
Each camera may be paired to two host devices.
2
Installation Guide for EasyIP Systems
