VADA VFB-S35, Installation Manual

Page: 20 / 44

20
VADA FLOW BOSS SUBMERSIBLE PUMP VFB-S35 INSTALLATION MANUAL
PART 5: CONNECT
TO A POWER SUPPLY
Once your submersible pump is positioned
and pipework is completed, it’s time to connect
to power.
Note: Do not use extension cords. These can
cause a voltage drop.
1. Before plugging the power supply cord
into the power point, ensure the power point
is in a dry and flood free location.
2. Plug the power supply cord into the
10 Amp power point. Do not switch on.
3. If you are using an VFB-APC or VFB-DSU,
you will need to connect the IEC socket
from the pump to the IEC plug cord on
the device, then connect the power chord
to the power point. If you are connecting
directly to a power outlet (without an
VFB-APC or VFB-DSU), connect the
two supplier cords using the IEC socket
and connect to the power chord to the
power point.
Note: Supply voltage that is outside the
limits specified can cause the motor to
overheat leading to overload tripping, reduced
component life or seriously damage pump,
voiding warranty.
INSTALLATION
OFF
OFF
In accordance with AS 3350.2.41
we are obliged to inform you
that this pump is not to be used
by children or infirm persons and
must not be used as a toy.