7
Digital inputs
DAC-10 digital audio connectivity:
•
AES/EBU balanced digital audio input
•
BNC SPDIF digital audio input
•
COAXIAL SPDIF digital audio input
•
TOSlink optical SPDIF digital audio input
•
USB 2.0 audio PCM input (up to 24bit/192kHz)
DAC-10 DSD digital audio connectivity:
•
BNC SPDIF digital audio input
•
COAXIAL SPDIF digital audio input
•
TOSlink optical SPDIF digital audio input
•
USB 2.0 audio PCM input (up to 24bit/192kHz)
•
USB 2.0 audio DSD input for DSD64 stream
AES/EBU:
Use a screened, twisted pair cable from the digital output of your CD transport or CD
player to the AES/EBU digital input of the DAC-10 (AES/EBU socket is a receptacle type)
Coaxial:
Use a RCA plug terminated, coaxial interconnect of your choice for the COAXIAL digital
input
.
The cable for the COAXIAL input should be no longer than 1.5m (5 feet) for the best
result
USB:
Use USB 2.0 cable fitted with USB type B plug terminated for the DAC side. For best
results use a good quality USB 2.0 cable without any sleeve inductors.
NB - DAC-10 USB interfaces are powered from our on-board, purpose designed, extremely low
noise linear power supply (not from your USB socket – which is used for data transfer only).
TOSlink:
Use preferably multi-strand glass fibre type optical audio cable.
NB - 24bit/192kHz sample rate playback through TOSlink cannot be guaranteed.
BNC:
Use same type of preferred coaxial cable as used for the RCA Coaxial input, terminated
with the BNC plug.
