16
Vacuvita manual
www.vacuvita.com
- You will hear the air pump removing the air from the Home Base -
the vacuum process has started.
- During the vacuum process, the pump may switch to a higher pump
level up to two times. You will hear a slightly louder and higher pump
sound. This is normal for the operation of the pump and does not
affect the lifetime of the Vacuvita Home Base.
- After max. 90 seconds (depending on the fill level) the Home Base
will reach its vacuum level and the pump will switch off automatically.
- Just as your refrigerator checks and adjusts its temperature when
operating, the Vacuvita Home Base checks its vacuum level at regular
intervals. At those intervals the pump will switch on to maintain the
vacuum level in the Home Base.
- To open your Home Base again, just press the easy access control
button. This may be done at any time while it is operating.
Cleaning the Home Base
- Open the Vacuvita Home Base by pressing
the control button on the front.
- To protect against the risk of electric shock,
cut the electric power by removing the plug
from the power outlet.
- Clean both the outside and the inside of the
Home Base using a sponge or cloth with
water and mild soap.
Be careful not to flood the vacuum socket
or air filter with water! Do not use the
inside of the Home Base as a bowl for
washing up. Do not submerge the Home
Base in water!
- If required, the lid seal can be removed for
cleaning. Gently pull it from the inside of
the lid and use water and a mild soap.
Do not put the seal in the dishwasher.
Do not use sharp objects to remove or reinstall the seal.
- To re-install the seal, make sure it is positioned properly, with the
solid section facing towards the inside and the two thinner flaps
facing outside the Home Base.
-
Gently press the seal in the groove, by first positioning the seal at the
four corners and then pressing it down in the straight sections
- Be sure to press along the entire length of the seal, so that it is
properly positioned and distributed evenly along the groove. Make
sure not to stretch the seal during application.
SECTION A-A
SCALE 2 : 1
