page 20 of 68
20901106_EN_MD4_MV2_VARIO_select_V1.0_140818
be contaminated. Take adequate precautions to pro-
tect people from the effects of dangerous substances
(chemicals, thermal decomposition products of fluoro
-
elastomers). Use appropriate protective clothing and
safety goggles.
+
Interruption of the pump (e.g., due to power failure),
failure of connected components or of parts of the sup-
ply, or change in parameters must not be allowed to
lead to dangerous conditions. In case of a diaphragm
failure or in case of a leak in the manifold, pumped
substances might be released into the environment or
into the pump housing or motor.
Comply with all notes regarding proper use of the
pumps, as well as operation and maintenance guid-
ance.
+
The residual
leak rate of the equipment
might render
possible an exchange of gas, albeit extremely slight,
between the environment and the vacuum system.
Adopt suitable measures to prevent contamination of
the pumped substances or the environment.
• Ensure that no parts of your clothing, hair or fingers
can be caught or drawn in at the inlet of the pump.
Never insert fingers or drop any other object into the
inlet or outlet.
• You must take suitable precautions to prevent any
dangerous situation from arising if the controller starts
the VARIO pump, switches a coolant valve or opens a
venting valve.
•
Attention
: If the controller is set to
Autostart
, the pro-
cess will start immediately when switching on the device
or in case of power recurrence after a power failure. It
is your responsibility to ensure that automatic start-up
of the system will not lead to any dangerous condition.
Provide appropriate safety measures. Check
prior to
starting the proces
s whether the option ”
Autostart
”
(menu: Settings\Basic Settings) is enabled.
