Cleaning the Brush Assembly
Thread, string, carpet fiber, fuzz, and pet
hair occasionally become wound around
the brush assembly. These items should
be routinely removed to keep the brush
assembly clean and to maintain efficiency.
1.
Disconnect the powerhead from
the hose and wands. Be sure parts
have stopped spinning before
working on the turbine powerhead.
2. Turn the powerhead over (Fig.3).
3. Strings and other entangled items
can be removed by unwinding them
by hand or carefully with scissors.
Cleaning the Intake Nozzle
If the turbine nozzle becomes obstructed:
1. Turn off the vacuum system
and disconnect the powerhead
from the wand.
2. Turn the powerhead over and
remove the clear belt cover by
first rotating the two latches
counterclockwise until they
align with the openings in the
3. Remove debris from the intake and turbine. Rotate the brush roller
to ensure the system is clear. Make sure the red seal on the belt cover
and mating surfaces are free from dirt particles before reassembling.
Check that the belt teeth are engaged with the turbine drive shaft
sprocket. Check belt condition and position on sprocket and on
brush roller.
4.
Reassemble the belt cover to the unit:
Insert the front of the belt
cover under the base plate edge and press belt cover onto housing.
Rotate the two latches clockwise until they lock into place.
IMPORTANT: Check that a proper seal is made. Unit performance is
dependent on a proper seal.
belt cover. Lift the belt cover out from under the base plate (Fig. 4).
FIG. 3
FIG. 4
3
H-431
Plastic Hose Hanger
CB-180
Mesh Tool Caddy Bag
8
•
Holds accessories and tools making them more
manageable.
•
For storing and transporting.
•
Mount on a wall in a closet, garage, or any other
convenient location for hose storage.
•
Coil your hose around this hanger to store when not in
use.
•
Use of hanger can increase the life of your hose and
save space while storing.
•
Mounts using only one stud and two screws.
L6105
UT-630BBLK
Premium Upholstery Tool with Brush
•
Cleans upholstered furniture, drapes, mattresses,and
even works well on vehicle upholstery and carpets.
•
Continuous airflow is critical to cleaning
results. This tool is designed to prevent
airflow from being cut off.
•
The brush strip gently engages upholstery
to lift debris and groom surfaces being cleaned.
