4-Channel/8-Channel Vehicle Monitoring DVR System User Manual
12
E.
Boot and Shutdown
(1)
Boot
Insert the SD card into the SD card slot on the local end, lock the dust lock,
and then turn on the power. After about 30 seconds, the light will turn on
and the boot will be completed.
。
(2)
Shutdown
After turning off the power, wait about 5 seconds. After the super
capacitor is fully discharged, the SD card can be removed at this time, and
the video file can be read from the computer.
。
(3)
Indicator Lights
REC Indicator(Red Light)
No flicker, indicating not recording
Lights flashed off, indicating recording
The light flashes quickly, indicating that the trigger event was recorded
。
GPS Indicator(Blue Light)
No lights, indicating GPS is not positioned
Constant light indicates GPS positioning completed
LAN Indicator (Orange Light)
No lights, indicating that the network is not connected
The light is on, indicating that the network is connected
(4)
SD Card
When both cards are empty cards, the recording priority is SD1. If there
is video data in the SD card, the latest video file data is preferred.
(
Note : If the playback function is used on the local player, simultaneous
recording cannot be performed
。)