19
( 1 ) Basic Setup
Path: Main Menu->Config management->Basic setup
The setup page is divided into the System and Date & Time
setup pages.
(1.1) System
a. Setup DVR Name, You can key in 4 characters for Chinese
words or 12 characters Arabic numerals (words).
(Note:
recommended to link by remote to display Chinese word)
b. Device DVR ID (000-255): Can be operated with different ID,
The setting of remote control should be changed to correspond
to different ID. Otherwise the remote control can’t function to
the DVR. The ID of DVR and remote control is set to 255. If the
DVR ID’s changed to 123, then the remote control should be
set up as below procedures:
(1) Press “DVR” button on remote control
(2) Key in the number “1” “2” “3”in sequence then press
“ENTER”
c. Image format in the software setup(NTSC or PAL), after setup
need to restart DVR
d. To set the login to the system, if you want to check the
password.
(Note: if not set to check, any user all can login.)
e. Display time setup: If need to display time & date in monitor
screen.
f. Video output to select the main screen(Output interface /
HDMI / CVBS (analog output) / and 800*600 / 1024*768 /
1280*1024 three VGA resolution for selection. There are 2
video output, one is main screen output ( there are menu
setting screen), another vice-screen only image output( no
menu setting can operate). (
Note: The first boot for DVR (or
revert to factory default), One of the two screen will show menu
(see below), select the main screen to output.)