Keypad Remote Control Options
vacon
15
Step 11. Assembling the Remote Keypad Interface (XRKMK only)
1. Insert the connector stacker into the receptacle on the remote keypad assembly (removed in
Step 9
) as shown
in
Figure 11
below.
2. Insert the keypad interface board onto the rear of the keypad assembly, being sure to engage the connector
stacker simultaneously.
3. Fasten the keypad interface assembly with five (5) M3.5 x 10 screws along with the loop clamp provided. Limit
installation torque to 12 in-lb. maximum.
Figure 11: Assembling the Remote Keypad Interface (XRKMK Option)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
