Options
vacon • 68
8
8.2.5
Vacon keypad with graphical display
The graphical keypad features an LCD display and 9 buttons.
8.2.5.1
Keypad display
The keypad display indicates the status of the motor and the drive and any irregularities in motor or
drive functions. On the display, the user sees information about his present location in the menu
structure and the item displayed.
8.2.5.2
Main menu
The data on the control keypad are arranged in menus and submenus. Use the Up and Down arrows
to move between the menus. Enter the group/item by pressing the OK button and return to the for-
mer level by pressing the Back/Reset button.
The
Location field
indicates your current location. The
Status field
gives information about the
present status of the drive. See Figure 50.
Figure 50. Main menu.
8.2.5.3
Using the graphical keypad
Editing values
Change value of a parameter following the procedure below:
1.
Locate the parameter.
2.
Enter the
Edit
mode.
3.
Set new value with the arrow buttons up/down. You can also move from digit to digit with the
arrow buttons left/right if the value is numerical and change then the value with the arrow but-
tons up/down.
4.
Confirm change with OK button or ignore change by returning to previous level with Back/
Reset button.
Location field
Status field
(Parameter ID number
Main Menu
Quick Setup
( 17 )
Parameters
( 12 )
STOP
READY
I/O
ID:
M1
( 5 )
Monitor
Activated group/item. Press OK to enter.
Number of items in the group
STOP/RUN
Status field
READY/NOT READY/FAULT
Control place:
PC/IO/KEYPAD/FIELDBUS
ALARM
and current menu location)
Direction
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
