Vaco VAC07W, Instruction Manual, Page: 31 / 113

31
SLEEP FUNCTION
•
This function is useful for the night as it gradually reduces operation of the appliance.
•
To set this function correctly:
•
Select the cool or heat mode as described above.
•
Press the “ ” button.
•
The appliance operates in the previously selected mode.
•
When you choose the sleep function, the screen will reduce the brightness, and the fan
speed is low.
•
The SLEEP function maintains the room at optimum temperature without excessive
fluctuations in either temperature or humidity with silent operation. Fan speed is always
at Low, while room temperature and humidity vary gradually to ensure the most
comfortable.
•
When in COOL mode, the selected temperature will increase by 1°C(1 °F) per hour in a 2
hour period. This new temperature will be maintained for the next 6 hours. Then the
appliance turn it off.
•
The SLEEP function can be cancelled at any time during operation by pressing the
"Sleep", "Mode" or "fan speed" button.
•
In FAN or DRY mode, SLEEP function cannot be set.
SETTING THE TIMER
•
-This timer can be used to delay the appliance start up or shutdown, this avoids wasting
electricity by optimizing operating periods.
PROGRAMMING START UP
•
Turn on the appliance, choose the mode you desire, for example cooling, 24°C an d
high fan speed. Turn off the appliance.
•
Press the button, the screen will display 1-24 hours.
•
Press several times until the corresponding time is displayed. Wait about 5 seconds, the
timer will be active, then “Timer” symbol is displayed on screen.
•
Press again the “ " button, the timer will be cancel led, and the ’’Timer” symbol will
disappear from screen.