Vaco VAC07W, Instruction Manual

Page: 29 / 113

29
INSERTING OR REPLACING THE
BATTERIES
•
Remove the cover on the rear of the remote control;
•
Insert two "AAA" 1.5V batteries in the correct position (see
instructions inside the battery compartment;
NOTE:
•
If the remote control unit is replaced or disposed of, the batteries must be removed and
discarded in accordance with current legislation as they are harmful to the environment.
•
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
•
Do not dispose of batteries In fire. Batteries may explode or leak.
•
If the remote control is not be used for a certain length of time, remove
the batteries
COOL mode
•
Ideal for hot muggy weather when you need to cooling and dehumidify
the room.
•
To set this mode correctly:
•
Press the “ ” button a number of times until the “Cool” symbol light appears.
•
Select the target temperature 18°C - 32°C (64°F - 90°F) by pressing the “ ” or “ ”
button until the corresponding value is displayed.
•
Select the required fan speed by pressing the “ ” button. Different fan speed have
different function.
High To achieved the temperature as fast as possible.
Low Run of the low noise.
•
The most suitable temperature for the room during the summer varies from 24 °C to
27°C
(75°F to 81 °F ). You are recommended, however, not to set a temperature much
below the outdoor temperature. The fan speed difference is more noticeable when the
appliance is under FAN mode but may not be noticeable under COOL mode.