17
TROUBLESHOOTING
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The wet/dry vacuum will not
operate.
No power supply.
Check the power supply, cord,
breakers, and fuses.
Faulty power cord.
Unplug and check the power
cord. If damaged, have it
repaired by a professional.
Collection tank is full.
Empty the collection tank.
Switch in the wrong position.
Press the ON ‘I’ button on the
power head.
The dust comes out from the
motor cover.
The cartridge filter is missing or
damaged.
Attach or replace the cartridge
filter.
Vacuum has been used to
collect fine dust, such as dry
wall dust, fireplace soot, or
ash, without a fine dust filter
equipped.
Remove the standard cartridge
filter and install the appropriate
fine dust cartridge filter.
Reduced efficiency and motor/
speed vibration.
There is a blockage in the
nozzle, hose, or the collection
tank inlets. The cartridge filter is
clogged by fine dust.
Check nozzle, hose and
collection tank inlets for
blockage. Take off the filter and
clean it or install a new cartridge
filter.
The remote control will not
operate.
The remote control is not paired
with the vac.
Reset the remote control using
the instructions on page 16.
The battery is dead.
Replace the battery.
