VP
112
is not sealing pouch properly -
• Seal time may not be long enough. Increase seal time and try again.
For detailed instructions, refer to “Operating Instructions”.
• Pouches will not seal if any moisture, food particles or debris are present in the seal
area. Wipe the inside of the pouch clean and try again.
• Pouch must be properly placed along the seal bar. Make sure the entire pouch is
over the seal bar and there are no wrinkles in pouch material.
VP
112
is not vacuuming canister properly -
• The accessory hose may not be properly attached. Ensure the hose is
completely attached to the lid of the canister and the accessory port, try again.
• Make sure the canister lid is turned to the “vacuum” setting.
• During the vacuum process, it might be necessary to press down on lid to
engage vacuum.
• Leave adequate head space at the top of the canister.
• Make sure there isn’t any damage to the canister and lid. Sometimes hairline
cracks can develop in canisters. When this happens the canister is no longer
air tight and should be discarded.
• Twist knob on lid of canister to make sure it is attached securely.
If problems persist, contact customer support at 800.821.7849 for further
assistance. Thank you for purchasing the
VAC
MASTER
®
VP
112
.
17
Troubleshooting
