Vacmaster VOM205P Operator'S Manual Download Page 14

Page: 14 / 16

TROUBLESHOOTING

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE

TROUBLESHOOTING.

PROBLEM

POSSIBLE CAUSE

SOLUTION

The wet/dry

vacuum will not

operate.

No power supply.

Check the power supply, cord,

breakers, and fuses.

Faulty power cord.

Unplug and check the power cord.

If damaged, have it repaired by a

professional.

Collection tank is full.

Empty the collection tank.

Switch in the wrong position.

Press the ON ‘I’ button on the power

head.

The dust comes

out from the

motor cover.

The reusable cloth filter is missing

or damaged.

Attach or replace the reusable cloth

filter.

Reduced

efficiency and

motor/speed

vibration.

There are blockages in the nozzle,

hose, or the collection tank inlets.

Unplug and check nozzle, hose and

collection tank inlets for blockages.

The reusable cloth filter is clogged

by fine dust.

Take off the filter and clean it or

install a new reusable cloth filter.

Summary of Contents for VOM205P

















Search results

Summary of Contents for VOM205P

Reviews:

Related manuals for VOM205P

Brands by name

Popular brands

Vacmaster VOM205P, Operator'S Manual

Search results

Summary of Contents for VOM205P

Reviews:

Related manuals for VOM205P

Brands by name

Popular brands