7
GB
UNPACKING AND CHECKING CARTON
CONTENTS
1
Power Head
10
Blowing Port
19
Hard Floor Tool
2
Hose Storage
11
Power Cord Storage Hook
20
Detachable Power Cable
3 Latch
12
Floor Head Holder
21
Cable Restraint Hook
4 Accessory Storage
13 Extension Wand (x3)
22
Brass Moss Removal Brush
5 Caster
14
Suction Hose
23 Round Brush
6 Container
15
Crevice Tool
24
Handle With Air Flow
Regulation
7
Suction Port
16
Washable Wet/Dry Filter
(pre-installed)
25
Screw (x6)
8
On/Off Switch
17
Nylon Pre-filter (pre-installed)
26
Instruction Manual
9
Carry Handle
18
Artificial Grass Tool
27
Filter Retainer (pre-installed)
ASSEMBLY
NOTE:
A Phillips screwdriver is required.
1) Remove all the contents from inside of the vacuum cleaner container.
2) Attach the carry handle into the slots located on the top of the power head. Secure them with
supplied screws (Fig. 1).
3) Turn the container upside down and insert the feet with casters into the slots and apply
pressure until they click into place. Secure them with supplied screws (Fig. 2).
4) Your vacuum cleaner comes ready for both wet and dry vacuum cleaning with the washable
cartridge filter and pre-filter pre-installed. If the cartridge filter is not installed, refer to page 8.
5) Secure the power head back on the container, using the latches. Insert the locking the end of
the hose into the suction port of the container and lock into place (Fig. 3).
6) Choose the desired accessories and/or extension wands and push fit onto the hose nozzle (Fig.
4).
7) Attach the detachable power cable to the connection lead using the cable restraint hook as
illustrated (Fig. 5).
Summary of Contents for VOC1218PF
