background image

4

DOUBLE INSULATION INSTRUCTIONS

EXTENSION CORDS

This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system.  Use 

only identical replacements parts.  Read the instructions for Servicing Double-Insulated Wet/Dry 

Vacs before servicing.  Use this Wet/Dry Vac as described in this manual.  Observe the following 

warnings that appear on the motor housing of your Wet/Dry Vac.

When using an extension cord with your Wet/Dry Vac refer to the following table to determine 

the required A.W.G. wire size.  Before using the vacuum cleaner, make sure the power cord and 

extension cord are in good working condition.  Make repairs or replacements before using the 

vacuum cleaner.  Only use extension cords that are rated for outdoor use.

• DO NOT use without filters in place.

CAUTION: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS, UNPLUG BEFORE 

SERVICING.

CAUTION:

Do not vacuum drywall dust or fireplace soot or ash with standard Wet/Dry filter.  This is a very fine 

dust which will not be captured by the filter and may cause damage to motor.  When vacuuming 

fine dust use a fine dust filter (sold separately).

DOUBLE INSULATED - GROUNDING NOT REQUIRED - WHEN SERVICING USE 

ONLY IDENTICAL REPLACEMENT PARTS.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.  

STORE INDOORS.

WARNING:

Length of Extension Cord

A.W.G. Wire Size

Not recommended

25 Feet 

 7.5 Meters

50 Feet   

  15.25 Meters

100 Feet 

   30.5 Meters

150 Feet  

  45.7 Meters 

110V-120V

Amps

0-6

7-10

11-12

13-16

18
18
16
14

16
16
16
12

16
14
14

14
12
12

WARNING:

                   

WITH A DOUBLE-INSULATED WET/DRY VACUUM, TWO SYSTEMS OF INSULATION ARE

PROVIDED INSTEAD OF GROUNDING.  NO GROUNDING MEANS IS PROVIDED ON A

DOUBLE-INSULATED APPLIANCE, NOR SHOULD A MEANS FOR GROUNDING BE ADDED.

SERVICING A DOUBLE INSULATED WET/DRY VACUUM REQUIRES EXTREME CARE AND

KNOWLEDGE OF THE SYSTEM, AND SHOULD BE DONE ONLY BY QUALIFIED SERVICE

PERSONNEL.  REPLACEMENT PARTS FOR A DOUBLE-INSULATED WET/DRY VACUUM

MUST BE IDENTICAL TO THE PARTS THEY REPLACE.  YOUR DOUBLE-INSULATED

WET/DRY VAC IS MARKED WITH THE WORDS ‘DOUBLE INSULATED’ AND THE SYMBOL

     (SQUARE WITHIN A SQUARE) MAY ALSO BE MARKED ON THE APPLIANCE.

SERVICING OF DOUBLE-INSULATED WET/DRY VACUUM

Summary of Contents for VF408














Reviews: