www.VacMasterFresh.com • 800-821-7849
10
CLEANING & STORAGE
Cleaning & Storage
Always clean and dry your VacMaster
®
SV1 immersion circulator
before storing. It is important to protect it from contact with objects
or equipment that could damage the digital control panel.
1. Routine Cleaning:
a. Turn circulator OFF and unplug from electrical outlet.
Warning: To avoid the potential of injury or burns, allow the circulator
to cool to room temperature before removing from water tank.
b. Keeping the unit upright, wipe the housing clean and dry
with a damp cloth. Do not use abrasive cleaners.
Warning: Never immerse the SV1 circulator controls or control panel in
water or other liquids or place it under running water. DO NOT clean in
a dishwasher.
2. Cleaning Pump Filter:
a. To minimize water contaminants and scale from entering
and damaging the circulating pump, the SV1 pump
includes an easy-to-clean pump filter. Simply remove and
clean with a soft brush, removing any lodged particles.
DO NOT use abrasive pads or hard tools to remove
trapped debris. Once clean, reinstall the pump filter.
Inspect pump filter periodically.
3. Mineral or Water Scale Deposits:
a. Depending on the frequency of use and your water hardness,
minerals and scale may build up on your circulator’s heater,
pump and other components. If deposits are noticed or after
200 hours of use, use your water tank to run the circulator in
either a 15% white vinegar in water solution or a 10% food
safe calcium & lime remover in water solution at 80°C or
176°F for 3 hours or until minerals or scale is removed. Wipe
clean and dry throughly when done.
PUMP FILTER