www.VacMasterFresh.com | 800-821-7849
3
Vacuum Packaging Tips
How to Use Your PRO275
Vacuum Cycle
Runs for a set time - counting down to zero
Sealing Cycle
Runs for a set time - counting down to zero
Inspect the pouch
- When the lid opens, remove and inspect the pouch.
Vacuum confirmation
- Check the quality of the vacuum by looking at the tight-
ness of the pouch and the product. Look for air pockets or air leaks. If you notice
that the product is not vacuum packaged tightly, then increase the vacuum time by
5 seconds and vacuum and seal again.
Seal confirmation
- Inspect the pouch seal. A positive seal will appear clear upon
inspection. If the seal is spotty or incomplete, increase the seal time by 0.1 second.
If the seal appears white or milky, decrease the seal time by 0.1 second. Once the
settings are determined for your application, vacuum and seal again.
Set your vacuum sealing time
- Starting at 5 set your time on the control
panel. Press start after you make sure everything is secure.
3
4
5
6
If the product is vacuumed and sealed tightly, then the process is complete.
Place the bag across the seal bar
- Close the lid on the front corners.
1
6
Press in the sides of the PRO275
- Make sure your PRO275 is locked by
pressing in the side buttons on the machine.
2
Lid Release
After sealing, the lid will unlock, then
BEEP. You may then open it.
