8
DATA FORM
：
Date
Time
Temp
20150202
15:16
20.3
Set the storage module time
Press button
and
for 3 seconds at the same time, can view and set the storage
module time.
During normal operation, press button
and
for 3 seconds at the same time, the
display will show "t0" (year), then can view and set the storage module time.
Press button
or
to rollover the time code, will see t0(year)，t1(month)，t2(day)，
t3(hour)，t4(minute)
After choose time code, press button
, digital tube displays the current system time.
Press button
or
to adjust the time.
press
, return to time code display, time saved automatically.
If need to adjust other time, repeat step 2 to 5.
After modification, press button
for 3 seconds, exit the setting mode.
Attn: If no button is pressed within 10 seconds, will exit the setting mode automatically. And
time modification will be invalid if the
key is not pressed.
6. STORAGE NOTES
Start the freezer with nothing in it before storing items. After entering a stable operation state
(Best to run empty freezer for more than 4 hours), refrigerated items shall be put into the
freezer after the freezer is fully cooled.
The items or other products put in the freezer at one time shall not be overcrowded.
Appropriate gaps shall be ensured to facilitate the circulation of cool air in it.
The low-temperature freezer refrigeration system is used to maintain a low temperature
rather than a quick-freezing device. If a large capacity (high water content substance) is to be
stored, it shall be stored after pre-cooling in other quick-freezing devices, so as to avoid the
long-term operation of refrigeration system without stopping.
When the initial storage capacity is large, the temperature shall be gradually reduced.
Reduce the temperature by 10℃ in each step, and keep that temperature for 1-2 hours until
it reaches the stored temperature Keep away from the metal edge when storing plastic bag
products, so as not to scratch the plastic bag.
