12
12 DOCK
13 DOCKING TEST
14 BATTERY CHARGING METHODS
Preparations
• Find a proper place (we recommend a hard surface floor)to put the Self-Charging Home Base in the
room. Leave about 60cm (2ft) clearance around the Home Base.
• Connect the battery charger to the power input socket on the back of home base first. Then, place
home base against the wall. Don’t leave loose wire around the wall. Finally, plug battery charger to AC
power outlet on the wall.
• Make sure the LCD display on the Home Base is on. This means that the Home Base has been powered
on, and it is ready to charge the myVacBot B100.
• Put the myVacBot B100 on the floor close to the Home Base and turn it on. Now press the „Home“ key
on remote control. The myVacBot B100 should return to the Home Base automatically for self-charging.
• Make necessary adjustment to the Home Base if the myVacBot B100 can not dock on the Home Base
properly.
• Put the myVacBot B100 on the floor close to the Home Base and turn it on. Now press the „Home“ key
on remote control. The myVacBot B100 should return to the Home Base automatically for self-charging.
• Make necessary adjustment to the Home Base if the myVacBot B100 can not dock on the Home Base
properly.
Pull out
Remove the insulation sheet
Charger socket
Wire slot
Please sattle down the cable of
charger into the back side slot
of base.
Charger plug-in socket
