V2 AYROS 1000D 24V-120V, Manual

Page: 39 / 116

ENGLISH
- 37 -
L K J
3.5 - MOTOR OVERRIDING SYSTEM
In case of absence of current, the gate can be released by
operating on the motor:
1. Open the hatch of the lock J in front of the motor
2.
Insert the key
K
in the lock and turn clockwise to open
the hatch of the release on the side
3.
Insert the key
L
into the hole and turn clockwise until
reached the limit switch
4.
At this point you can manually move the gate
To restore the automation, proceed as follows:
1.
Bring the gate to the fully closed position
2 . turn the key L anticlockwise until reached the limit
switch, then draw it out
3. turn the key K anticlockwise closing the hatch of the
lock, then draw it out
4. Close the lock with the hatch J