Installation instructions
Convenient storage drawer
for tumble driers
J283.050-3
13.8.09 ITH
8
5.
Affixing the floor mounting plates
A
Remove the protective film from the mounting plates.
A
Lift up the convenient storage drawer and the appliance at the front and move it aside in order to
stick the mounting plates in position.
A
Clean the adhesive zone with pure benzine or acetone.
A
Taking the fixing position from the installation template
3
, stick the mounting plates to the floor.
Screwing the floor mounting plates
A
Move the convenient storage drawer aside to drill the mounting plates.
A
Mark the centre of the holes, using the installation template
3
.
A
Drill ø 6 mm holes and insert plugs. Screw the mounting plate in place. Drilling inaccuracies can
be compensated by means of the eccentric hole in the mounting plate.
6. Pull the convenient storage drawer out of the niche and remove the installation template.
7. Unscrew the adjuster feet by hand until the folded installation
template
3
fits under the appliance
5
at all 4 corners (see
detail
X
).
8. Lift the appliance and push the front adjuster feet from above
into the finished profile
6
of the convenient storage drawer.
9. Place the rear adjuster feet in the positioning plate
7
. Where
necessary, level the appliance to obtain a uniform gap of 2 mm
between the appliance and the convenient storage drawer.
10. Place appliance and convenient storage drawer in position.
11. Insert the drawer and slide in until the rail springs re-engage.
12. Mount plinth W5.2014 where applicable.
Tools: Combi spanner 19 mm
8
(supplied) and spirit level
9
Rear adjuster feet
A
Loosen lock nuts
10
.
A
Align convenient storage drawer vertically by turning the foot by hand.
A
Tighten the lock nuts firmly.
Front adjuster feet
A
Place the appliance in the floor mounting plate.
A
Loosen lock nuts
10
.
A
Align convenient storage drawer vertically by turning the foot by hand.
–
Convenient storage drawer and appliance must be absolutely stable.
A
Tighten the lock nuts.
To avoid damaging the convenient storage drawer, set the adjuster feet to the correct height of 22 mm, using the installation
template
3
, before placing the appliance in position.
Levelling
For fault-free operation the convenient storage drawer must stand perpendicular to the appliance with all feet firmly on the
ground and the lock nuts
10
must be firmly tightened.
3
=
=
5
7
3
22
2
6
Detail X
8
9
10